The braking system should be cared since this is one of the most important parts of an truck. Brakes are crucial for both being integral to vehicle safety and performance. Brakes also need to get occasional service such as the replacement of brake pads since they wear off as they are in use. Whereas most new trucks come up with semi-metallic brake pads, other types of pads are ready for use from aftermarket truck manufacturers that might be more useful for some drivers.
As for picking up replacement brake pads, some criteria have been referred for years. Semi-metallic and asbestos-based pads were put into service interchangeably. As health concerns begin to decline regarding with the usage of asbestos pads, newer materials such as ceramic, were used instead. Ceramic brake pads as an option started in the 1990s. Recently various different types of ceramic pads are in use in addition to range of semi-metallic and other options.
Replacing of Brake Pads
Since brake pads exhaust on a heavy duty vehicle, they need to be replaced. The type of brake pad picked up and its metal substance emerges as a significant role in how long the pads will continue. Type also has influence on how much noise the brakes will produce, the dust accumulated onto the truck wheels, and the anticipated braking performance.
Importance
Brake pads render a required resistance between the brakes and the wheel rotors on a truck. As the brakes pressed to slow a heavy duty vehicle, or to stop it, heat comes up. As the truck goes faster, it needs to be stopped faster.By the time brakes pressed, the heat production emerges on the brake pads. Metal substances on brake pads cope with more heat before they break down. The negtive aspect is that metal brake pads produce more noise, yield more brake pad dust and exhaust the rotors faster than those which have no metal substances.
Types
Brake pads for heavy duty vehicles have been modified in recent years. In fact, the brake pad sector has developed more subdivisions of brake pads such as non-asbestos organic, semi-metallic, ceramic and low-metallic NAO.
Metallic Characteristic
Regarding with metallic brake pads can be categorized as low-metallic and semi-metallic. The low-metallic type includes only a minimal amount up to 30 percent of steel or copper that enables them to emerge less noise and pad dust than the semi-metallic type, however more than ceramic brake pads. Semi-metallic brakes contain more metal up to 65 percent and more types of metals such as chopped steel wire or wool.This type of brake pad wears out the brake rotors faster and as compare to ceramic or low-metallic pads, may not supply adequate brake performance in cooler temperatures. Neverthelss, it is more long-lasting than the other two, and capable of transferring heart, according to Consumer Reports.
Ceramic Characteristic
Regarding with the ceramic brake pads, user may be satisfied since they may get highest braking benefits. There is no concern about damaging the rotors. This type doesn't give off the amount of brake pad dust as much as metal pads do according to Consumer Reports.
See the next content...
Air Brake Caliper Repair Kits Market